filters
More Options
Shortlist
  •   Add All to Shortlist
Name/Title
A brass button featuring an embossed anchor and flag design with a raised border round the edge.
Accession No
A97.779

Name/Title
A brass button featuring an embossed anchor and flag design with a raised border round the edge. There is a clip attached to the reverse of the button.
Accession No
A97.780

Name/Title
A circular brass seal for the South Taranaki Bacon Company. " THE / COMMON / SEAL / OF / THE SOUTH TARANAKI BACON COMPANY LIMITED " is marked in raised letters on the seal. There are two small threaded holes on the reverse of the seal where presumably a handle would have been attached.
Accession No
PA2009.091

Name/Title
A dark blue Royal New Zealand Artillery forage cap made of wool with red piping along the edges. There is one small brass button at the front and another is missing.
Accession No
A91.952

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier which can be adjusted by a wingnut which can allow the wheel to be removed. " J DIXON " is stamped on one side of the shank.
Accession No
TM2003.023

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. " 2 " is stamped on the head and some illegible writing is stamped in the shank.
Accession No
TM2003.024

Name/Title
A screw crease with a rounded wooden handle attached to a shank which ends in a shield shaped head which is split in two. A thumbscrew is threaded through the shank. There is a small leather strap at the end of the handle. " J E BUTLER LD. " is stamped into the top of the shank.
Accession No
TM2003.026

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 2 " is stamped into the head. " J.E BUTLER Ltd " is stamped into the shank.
Accession No
TM2003.027

Name/Title
A blunt edged knife with an upturned point on the blade and a rounded wooden handle. A brass band is around the handle where the shank meets the handle.
Accession No
TM2003.028

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " 1 " is stamped into the shank.
Accession No
TM2003.030

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " J DIXON " is stamped into the shank.
Accession No
TM2003.031

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. An indecipherable mark and " 4 " is stamped into the shank.
Accession No
TM2003.032

A leatherworking tool with a short blunt metal shank attached to a rounded handle. A brass band is wrapped around the portion of the handle where it joins the shank.
Accession No
TM2003.043

Name/Title
A shoe knife with a rounded wooden handle and a brass band where the handle joins the blade. There is an illegible manufacturer's mark on one side of the blade.
Accession No
TM2003.045

Name/Title
A fudge wheel which has a serrated wheel set to revolve on a steel shank that is attached to a rounded wooden handle.
Accession No
TM2003.050

A welt trimming knife with a circular cutting head mounted on a wooden handle. There is a brass band where the head is fixed to the handle. There are two illegible manufacturer's marks stamped on the blade. One of them may read " SNELL & ATHERTON " and there is a star design also stamped on the blade.
Accession No
TM2003.055

Name/Title
A purse crease with a rounded wooden handle attached to a shank which ends in a rounded head with two blunt edges." T DIXON & SON " is stamped into the shank.
Accession No
TM2003.056

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 3 " is stamped into the head. " J E BUTLER LD. " is stamped into the shank.
Accession No
TM2003.061

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in a shield shaped head with two blunt edges. " J E BUTLER LD." is stamped on the side of the shank.
Accession No
TM2003.063

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier. "G.S.C.S Borne & Co" is stamped into one side of the shank. "ESTD1826" is stamped on the other side in a rectangle. "6" is stamped on top of the shank.
Accession No
TM2003.064

Name/Title
An American racer with a slender shank that has a narrow groove running down the centre. The shank is attached to a rounded wooden handle and there is a brass band around handle where it joins the shank. " 2 " is stamped on the top of the shank along with some other illegible manufacturers marks.
Accession No
TM2003.065

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. A series of dents are stamped into the brass band where the shank joins the handle.
Accession No
TM2003.066

Name/Title
A fudge wheel which is made up of a serrated wheel set to revolve on a steel shank attached to a rounded wooden handle. An illegible maker's mark is stamped on a side of the shank.
Accession No
TM2003.067

Name/Title
A fiddler which has a smooth metal blade mounted in a rounded wooden handle. The blade is a flat half round which tapers slightly towards a rounded tip. A brass brand is fitted around the handle where the blade joins it. "GRA" is stamped very faintly on the wooden handle.
Accession No
TM2003.071

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a thick axe shaped head with three blunt edges. " CS OSBORNE & CO " is stamped into the shank. " 4 " is also stamped into the shank.
Accession No
TM2003.073
Loading...