filters
More Options
Shortlist
  •   Add All to Shortlist
Name/Title
A circular brass seal for the South Taranaki Bacon Company. " THE / COMMON / SEAL / OF / THE SOUTH TARANAKI BACON COMPANY LIMITED " is marked in raised letters on the seal. There are two small threaded holes on the reverse of the seal where presumably a handle would have been attached.
Accession No
PA2009.091

Name/Title
A 65th Regiment tunic button. The button features " 65 " at the centre of a raised circle. An illegible maker's name and " LONDON " is engraved on the reverse of the button.
Accession No
A92.269

Name/Title
A 12th Regiment tunic button. The button features " 12 " surrounded by leaf designs and surmounted by a crown. An illegible maker's name is engraved on the reverse of the button.
Accession No
A92.259

Name/Title
A 57th Regiment tunic button. The button features " 57 " at the centre surmounted by a crown and surrounded by leaf designs. " ALBUHERA " is embossed above the " 57 ." " SMITH KEMP & WRIGHT BIRMINGHAM " is engraved on the reverse of the button.
Accession No
A92.262

Name/Title
A 43rd Regiment tunic button. The button features " 43 " surrounded by leaf designs. An illegible maker's name is engraved on the reverse of the button.
Accession No
A92.260

Name/Title
A 18th Regiment tunic button. The button features " 18 " surmounted by a harp. " FIRMIN & SONS LONDON " is marked on the reverse of the button.
Accession No
A92.270

Name/Title
A 57th Regiment tunic button. The button features " 57 " at the centre surmounted by a crown and surrounded by leaf designs. " ALBUHERA " is embossed above the " 57 ." " SMITH KEMP & WRIGHT BIRMINGHAM " is engraved on the reverse of the button.
Accession No
A92.261

Name/Title
A 65th Regiment tunic button. The button features " 65 " at the centre of a raised circle. An illegible maker's name and " BIRMINGHAM " is engraved on the reverse of the button.
Accession No
A92.268

Name/Title
A 57th Regiment tunic button. The button features "57" at the centre surmounted by a crown and surrounded by leaf designs. "ALBUHERA" is embossed above the "57." "SMITH KEMP & WRIGHT BIRMINGHAM" is engraved on the reverse of the button.
Accession No
PA2006.295

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier which can be adjusted by a wingnut which can allow the wheel to be removed. " J DIXON " is stamped on one side of the shank.
Accession No
TM2003.023

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. " 2 " is stamped on the head and some illegible writing is stamped in the shank.
Accession No
TM2003.024

Name/Title
A screw crease with a rounded wooden handle attached to a shank which ends in a shield shaped head which is split in two. A thumbscrew is threaded through the shank. There is a small leather strap at the end of the handle. " J E BUTLER LD. " is stamped into the top of the shank.
Accession No
TM2003.026

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 2 " is stamped into the head. " J.E BUTLER Ltd " is stamped into the shank.
Accession No
TM2003.027

Name/Title
A blunt edged knife with an upturned point on the blade and a rounded wooden handle. A brass band is around the handle where the shank meets the handle.
Accession No
TM2003.028

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " 1 " is stamped into the shank.
Accession No
TM2003.030

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " J DIXON " is stamped into the shank.
Accession No
TM2003.031

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. An indecipherable mark and " 4 " is stamped into the shank.
Accession No
TM2003.032

A leatherworking tool with a short blunt metal shank attached to a rounded handle. A brass band is wrapped around the portion of the handle where it joins the shank.
Accession No
TM2003.043

Name/Title
A shoe knife with a rounded wooden handle and a brass band where the handle joins the blade. There is an illegible manufacturer's mark on one side of the blade.
Accession No
TM2003.045

Name/Title
A fudge wheel which has a serrated wheel set to revolve on a steel shank that is attached to a rounded wooden handle.
Accession No
TM2003.050

A welt trimming knife with a circular cutting head mounted on a wooden handle. There is a brass band where the head is fixed to the handle. There are two illegible manufacturer's marks stamped on the blade. One of them may read " SNELL & ATHERTON " and there is a star design also stamped on the blade.
Accession No
TM2003.055

Name/Title
A purse crease with a rounded wooden handle attached to a shank which ends in a rounded head with two blunt edges." T DIXON & SON " is stamped into the shank.
Accession No
TM2003.056

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 3 " is stamped into the head. " J E BUTLER LD. " is stamped into the shank.
Accession No
TM2003.061

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in a shield shaped head with two blunt edges. " J E BUTLER LD." is stamped on the side of the shank.
Accession No
TM2003.063

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier. "G.S.C.S Borne & Co" is stamped into one side of the shank. "ESTD1826" is stamped on the other side in a rectangle. "6" is stamped on top of the shank.
Accession No
TM2003.064
Loading...