Object Search
41 results. Displaying results 1 - 41.
filters
- Department Industrial Remove filter Industrial
- Department Militarywear Remove filter Militarywear
- Subject Hats Remove filter Hats
- Subject War Remove filter War
- Subject Retail Remove filter Retail
Name/Title
A circular brass seal for the South Taranaki Bacon Company. " THE / COMMON / SEAL / OF / THE SOUTH TARANAKI BACON COMPANY LIMITED " is marked in raised letters on the seal. There are two small threaded holes on the reverse of the seal where presumably a handle would have been attached.
Accession No
PA2009.091
Name/Title
A dark blue Royal New Zealand Artillery forage cap made of wool with red piping along the edges. There is one small brass button at the front and another is missing.
Accession No
A91.952
Name/Title
A dark blue New Zealand Volunteers forage cap. The outside is trimmed with red ribbon and there is a brass badge of a horn on the side. Two brass buttons fasten at the front and hook and grommets at the sides.
Accession No
A81.880
Name/Title
A New Zealand Volunteers helmet covered in navy blue wool and curved downwards around the front and back of the brim. There is a brass spike at the centre of the crown and a brass badge on the centre front. " New Zealand Volunteers " is written on the badge.
Accession No
A77.326
Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier which can be adjusted by a wingnut which can allow the wheel to be removed. " J DIXON " is stamped on one side of the shank.
Accession No
TM2003.023
Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. " 2 " is stamped on the head and some illegible writing is stamped in the shank.
Accession No
TM2003.024
Name/Title
A screw crease with a rounded wooden handle attached to a shank which ends in a shield shaped head which is split in two. A thumbscrew is threaded through the shank. There is a small leather strap at the end of the handle. " J E BUTLER LD. " is stamped into the top of the shank.
Accession No
TM2003.026
Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 2 " is stamped into the head. " J.E BUTLER Ltd " is stamped into the shank.
Accession No
TM2003.027
Name/Title
A blunt edged knife with an upturned point on the blade and a rounded wooden handle. A brass band is around the handle where the shank meets the handle.
Accession No
TM2003.028
Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " 1 " is stamped into the shank.
Accession No
TM2003.030
Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " J DIXON " is stamped into the shank.
Accession No
TM2003.031
Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. An indecipherable mark and " 4 " is stamped into the shank.
Accession No
TM2003.032
Name/Title
A leatherworking tool with a short blunt metal shank attached to a rounded handle. A brass band is wrapped around the portion of the handle where it joins the shank.
Accession No
TM2003.043
Name/Title
A shoe knife with a rounded wooden handle and a brass band where the handle joins the blade. There is an illegible manufacturer's mark on one side of the blade.
Accession No
TM2003.045
Name/Title
A fudge wheel which has a serrated wheel set to revolve on a steel shank that is attached to a rounded wooden handle.
Accession No
TM2003.050
Name/Title
A welt trimming knife with a circular cutting head mounted on a wooden handle. There is a brass band where the head is fixed to the handle. There are two illegible manufacturer's marks stamped on the blade. One of them may read " SNELL & ATHERTON " and there is a star design also stamped on the blade.
Accession No
TM2003.055
Name/Title
A purse crease with a rounded wooden handle attached to a shank which ends in a rounded head with two blunt edges." T DIXON & SON " is stamped into the shank.
Accession No
TM2003.056
Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 3 " is stamped into the head. " J E BUTLER LD. " is stamped into the shank.
Accession No
TM2003.061
Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in a shield shaped head with two blunt edges. " J E BUTLER LD." is stamped on the side of the shank.
Accession No
TM2003.063
Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier. "G.S.C.S Borne & Co" is stamped into one side of the shank. "ESTD1826" is stamped on the other side in a rectangle. "6" is stamped on top of the shank.
Accession No
TM2003.064
Name/Title
An American racer with a slender shank that has a narrow groove running down the centre. The shank is attached to a rounded wooden handle and there is a brass band around handle where it joins the shank. " 2 " is stamped on the top of the shank along with some other illegible manufacturers marks.
Accession No
TM2003.065
Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. A series of dents are stamped into the brass band where the shank joins the handle.
Accession No
TM2003.066
Name/Title
A fudge wheel which is made up of a serrated wheel set to revolve on a steel shank attached to a rounded wooden handle. An illegible maker's mark is stamped on a side of the shank.
Accession No
TM2003.067
Name/Title
A fiddler which has a smooth metal blade mounted in a rounded wooden handle. The blade is a flat half round which tapers slightly towards a rounded tip. A brass brand is fitted around the handle where the blade joins it. "GRA" is stamped very faintly on the wooden handle.
Accession No
TM2003.071
Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a thick axe shaped head with three blunt edges. " CS OSBORNE & CO " is stamped into the shank. " 4 " is also stamped into the shank.
Accession No
TM2003.073