filters
More Options
Shortlist
  •   Add All to Shortlist
Name/Title
A brass milk skimmer with long handle and a broad pan with holes in it.
Accession No
A68.444

Name/Title
A brass cap badge of the XIII Reinforcements. The badge features the Roman numerals " XIII " at the centre flanked by two fern fronds and surmounted by a crown. " REINFORCEMENTS " is embossed on a scroll design at the base. A simple pin and clasp is mounted at the reverse of the badge.
Accession No
TM2003.261

Name/Title
A brass bracelet made up of nine modified New Zealand Forces buttons. Each button is linked by two thin loops threaded through circular eyes on each button. A circular clasp mechanism is attached to one end.
Accession No
TM2003.263

Name/Title
A very small brass button featuring a coat of arms.
Accession No
TM2003.264

Name/Title
Brass shoulder badge of the New Zealand Cyclist Corps. Consists of "NZCC" in a semi-circular shape with a brass clip on rear for fastening. "J.R. GAUNT" is stamped on the rear.
Accession No
TM.2002.169

Name/Title
Brass hat badge of the New Zealand Cyclist Corps. The badge is comprised of a wheel surmounted by a crown with the barrels and stocks of two guns on either side. A scroll with the following text l "N.Z. CYCLISTS CORPS" is below the wheel. "J.R. GAUNT / LONDON" is stamped on the back and there is a brass clip on the rear for fastening.
Accession No
TM.2002.171

Name/Title
A trench art paper knife and nib pen made of brass and steel. The decorated blade tapers to a point at one end and is slotted into a handle fashioned from a rifle bullet case that is decorated with a crown from a badge or a button. " MESSINES " is marked on the blade. A small nib pin with a short rounded handle fits into the bullet case.
Accession No
A82.276

Name/Title
A trench art paper knife made of brass with a curved blade and a four leaf clover at one end. The handle is formed by a rifle bullet which is adorned with a crown taken from a badge or a button. The clover leaf is slotted into the top of the bullet. " Sir de FRANCE " is marked on the blade. "1918 " is marked on the clover leaf.
Accession No
A82.275

Name/Title
A trench art brass napkin ring fashioned from a shell case. " TO AUNTY FROM / TROOPER CHENEY / CAIRO 1916 " is marked on the exterior along with a sphinx like figure.
Accession No
A70.257

Name/Title
A blackened brass King's Royal Rifle Corps hat badge. " CELAR ET AUDAT " (swift and bold) is marked near the top of the Maltese cross which is surmounted by a crown. " THE KING'S ROYAL RIFLE CORPS " is marked in a circle around a bugle horn emblem. The arms of the cross are marked with various battle honours.
Accession No
PA2009.177

Name/Title
A small, round brass Empire Day badge featuring a kiwi. " Our Day / 1917 " is marked above and below the badge. A simple straight pin is attached to the reverse.
Accession No
A86.415

Name/Title
A souvenir brass bowl commemorating Christmas Day 1915 at the New Zealand General Hospital in Cairo. " NEW ZEALAND GENERAL HOSPITAL CAIRO XMAS 1915 " is marked around the side of the bowl.
Accession No
PA2009.104

Name/Title
A souvenir brass bowl commemorating Christmas Day 1915 at the New Zealand General Hospital in Cairo. " NEW ZEALAND GENERAL HOSPITAL CAIRO XMAS 1915 " is marked around the side of the bowl.
Accession No
PA2009.103

Name/Title
A circular brass seal for the South Taranaki Bacon Company. " THE / COMMON / SEAL / OF / THE SOUTH TARANAKI BACON COMPANY LIMITED " is marked in raised letters on the seal. There are two small threaded holes on the reverse of the seal where presumably a handle would have been attached.
Accession No
PA2009.091

Name/Title
A brass badge featuring a hei tiki with "KIA MATE TOA" embossed on a scroll at the base. A simple pin mechanism is mounted vertically on the reverse.
Accession No
TM2003.262

Name/Title
A large brass plaque with six holes around the edge to allow it to be secured to a building. " REGISTERED OFFICE / NEWTON KING / (WHOLESALE) / LIMITED " is engraved in the plaque in marbled lettering.
Accession No
PA2004.219

Name/Title
A small brass compass with a point at the end of one arm and some adjustable jaws at the end of the other arm. The compass has a decorative bulb on the handle.
Accession No
TM2003.321

Name/Title
A brass compass with a screw mechanism on the side and a handle on one end. A nib or pen is missing from the socket.
Accession No
TM2003.332

Name/Title
A brass shaft of a drawing instrument. The shaft is split in two on both ends and has a ring around it.
Accession No
TM2003.330

Name/Title
A 37mm German artillery shell with a brass casing, a metal nose with a copper tip. " PATARONENFABRIK KARLSRUHE 1915 119A" is marked on the bottom of the casing.
Accession No
A91.919

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier which can be adjusted by a wingnut which can allow the wheel to be removed. " J DIXON " is stamped on one side of the shank.
Accession No
TM2003.023

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. " 2 " is stamped on the head and some illegible writing is stamped in the shank.
Accession No
TM2003.024

Name/Title
A screw crease with a rounded wooden handle attached to a shank which ends in a shield shaped head which is split in two. A thumbscrew is threaded through the shank. There is a small leather strap at the end of the handle. " J E BUTLER LD. " is stamped into the top of the shank.
Accession No
TM2003.026

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 2 " is stamped into the head. " J.E BUTLER Ltd " is stamped into the shank.
Accession No
TM2003.027

Name/Title
A blunt edged knife with an upturned point on the blade and a rounded wooden handle. A brass band is around the handle where the shank meets the handle.
Accession No
TM2003.028
Loading...