filters
More Options
Shortlist
  •   Add All to Shortlist
Name/Title
A brass milk skimmer with long handle and a broad pan with holes in it.
Accession No
A68.444

A brass adjustable candlestick. The candlestick has a circular base and a small adjustment knob on one side of the stem.
Accession No
A97.023

Name/Title
A simple brass candlestick with a square base. There is a grey band of metal running around the stem about 5cm above the base.
Accession No
PA2006.307

Name/Title
A trench art brass napkin ring fashioned from a shell case. " TO AUNTY FROM / TROOPER CHENEY / CAIRO 1916 " is marked on the exterior along with a sphinx like figure.
Accession No
A70.257

Name/Title
A small brass candlestick with a round, shallow saucer. The pillar has a wide overhanging lip. A cutaway section at the foot of the pillar was designed to hold a snuffer and there is an an ejection slot at one side which is missing a lever. The candlestick has a small curved handle with a thumb rest.
Accession No
A71.008

Name/Title
A small round brass incense burner decorated with bird and flower designs. The burner is hinged at the centre to allow access to the interior.
Accession No
A86.693

Name/Title
The upper part of a brass candlestick with a fluted top.
Accession No
PA2010.040

Name/Title
A decorated cast brass handle which is thought to have been part of a small nutcracker.
Accession No
PA2010.083

Name/Title
An oval brass door handle escutcheon with four holes countersunk in it and a square central hole. The escutcheon is bent and one fragment of it has broken loose.
Accession No
PA2010.081

Name/Title
A circular brass seal for the South Taranaki Bacon Company. " THE / COMMON / SEAL / OF / THE SOUTH TARANAKI BACON COMPANY LIMITED " is marked in raised letters on the seal. There are two small threaded holes on the reverse of the seal where presumably a handle would have been attached.
Accession No
PA2009.091

Name/Title
A brass forage cap badge of the 70th Regiment. The badge is shaped as a " 70 " with eyelets and a pin on the reverse.
Accession No
PA2010.082

Name/Title
A large brass plaque with six holes around the edge to allow it to be secured to a building. " REGISTERED OFFICE / NEWTON KING / (WHOLESALE) / LIMITED " is engraved in the plaque in marbled lettering.
Accession No
PA2004.219

Name/Title
A small brass compass with a point at the end of one arm and some adjustable jaws at the end of the other arm. The compass has a decorative bulb on the handle.
Accession No
TM2003.321

Name/Title
A brass compass with a screw mechanism on the side and a handle on one end. A nib or pen is missing from the socket.
Accession No
TM2003.332

Name/Title
A brass shaft of a drawing instrument. The shaft is split in two on both ends and has a ring around it.
Accession No
TM2003.330

Name/Title
A brass kerosene lamp which features a white lampshade resting over a clear glass inner sleeve. " THE / NEW JUNO / No 1 / MADE IN USA " is written on the lamp.
Accession No
A81.634

Name/Title
A brass tea urn. It has two wooden side handles, a tap at the front and a chimney at the top. There are Cyrillic letters impressed on top of the main body which read "BADASHEVB 1."
Accession No
A80.471

Name/Title
A single chambered set of bellows with wooden paddles, a brass nozzle and a leather diaphragm fastened to the paddles by brass studs. A leather retainer holds the handles together when not in use.
Accession No
A80.587

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier which can be adjusted by a wingnut which can allow the wheel to be removed. " J DIXON " is stamped on one side of the shank.
Accession No
TM2003.023

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. " 2 " is stamped on the head and some illegible writing is stamped in the shank.
Accession No
TM2003.024

Name/Title
A screw crease with a rounded wooden handle attached to a shank which ends in a shield shaped head which is split in two. A thumbscrew is threaded through the shank. There is a small leather strap at the end of the handle. " J E BUTLER LD. " is stamped into the top of the shank.
Accession No
TM2003.026

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 2 " is stamped into the head. " J.E BUTLER Ltd " is stamped into the shank.
Accession No
TM2003.027

Name/Title
A blunt edged knife with an upturned point on the blade and a rounded wooden handle. A brass band is around the handle where the shank meets the handle.
Accession No
TM2003.028

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " 1 " is stamped into the shank.
Accession No
TM2003.030

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " J DIXON " is stamped into the shank.
Accession No
TM2003.031
Loading...