filters
More Options
Shortlist
  •   Add All to Shortlist
Name/Title
A brass milk skimmer with long handle and a broad pan with holes in it.
Accession No
A68.444

Name/Title
A single brass cuff link with a narrow gold coloured oval shaped top engraved with a floral motif pattern and a chunky hammerhead-like rear fastener.
Accession No
TM2001.137

Name/Title
A circular brass seal for the South Taranaki Bacon Company. " THE / COMMON / SEAL / OF / THE SOUTH TARANAKI BACON COMPANY LIMITED " is marked in raised letters on the seal. There are two small threaded holes on the reverse of the seal where presumably a handle would have been attached.
Accession No
PA2009.091

Name/Title
A large brass plaque with six holes around the edge to allow it to be secured to a building. " REGISTERED OFFICE / NEWTON KING / (WHOLESALE) / LIMITED " is engraved in the plaque in marbled lettering.
Accession No
PA2004.219

Name/Title
A small brass compass with a point at the end of one arm and some adjustable jaws at the end of the other arm. The compass has a decorative bulb on the handle.
Accession No
TM2003.321

Name/Title
A brass compass with a screw mechanism on the side and a handle on one end. A nib or pen is missing from the socket.
Accession No
TM2003.332

Name/Title
A brass shaft of a drawing instrument. The shaft is split in two on both ends and has a ring around it.
Accession No
TM2003.330

Name/Title
A navy blue wool cap with a red band of binding around the top. " Kaiapoi " is written on the lining. "FVFB" features in brass lettering on the front. There is a leather sweatband on the inside.
Accession No
A97.476

Name/Title
A dark blue Royal New Zealand Artillery forage cap made of wool with red piping along the edges. There is one small brass button at the front and another is missing.
Accession No
A91.952

Name/Title
A purse with a brass frame and chain. The base is a purple fabric that is covered in purple and clear beadwork.
Accession No
A92.040

Name/Title
A dark blue New Zealand Volunteers forage cap. The outside is trimmed with red ribbon and there is a brass badge of a horn on the side. Two brass buttons fasten at the front and hook and grommets at the sides.
Accession No
A81.880

Name/Title
A New Zealand Volunteers helmet covered in navy blue wool and curved downwards around the front and back of the brim. There is a brass spike at the centre of the crown and a brass badge on the centre front. " New Zealand Volunteers " is written on the badge.
Accession No
A77.326

Name/Title
A white canvas duffle bag made of fabric that has been folded over and seamed on one side and at the bottom. A half circle brass clasp closes the bag, however, the lock is missing and is currently being held together by a piece of wire.
Accession No
A82.382

Name/Title
A black leather purse with circular brass clasp on the front flap.
Accession No
A69.826

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier which can be adjusted by a wingnut which can allow the wheel to be removed. " J DIXON " is stamped on one side of the shank.
Accession No
TM2003.023

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. " 2 " is stamped on the head and some illegible writing is stamped in the shank.
Accession No
TM2003.024

Name/Title
A screw crease with a rounded wooden handle attached to a shank which ends in a shield shaped head which is split in two. A thumbscrew is threaded through the shank. There is a small leather strap at the end of the handle. " J E BUTLER LD. " is stamped into the top of the shank.
Accession No
TM2003.026

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 2 " is stamped into the head. " J.E BUTLER Ltd " is stamped into the shank.
Accession No
TM2003.027

Name/Title
A blunt edged knife with an upturned point on the blade and a rounded wooden handle. A brass band is around the handle where the shank meets the handle.
Accession No
TM2003.028

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " 1 " is stamped into the shank.
Accession No
TM2003.030

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " J DIXON " is stamped into the shank.
Accession No
TM2003.031

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. An indecipherable mark and " 4 " is stamped into the shank.
Accession No
TM2003.032

A leatherworking tool with a short blunt metal shank attached to a rounded handle. A brass band is wrapped around the portion of the handle where it joins the shank.
Accession No
TM2003.043

Name/Title
A shoe knife with a rounded wooden handle and a brass band where the handle joins the blade. There is an illegible manufacturer's mark on one side of the blade.
Accession No
TM2003.045

Name/Title
A fudge wheel which has a serrated wheel set to revolve on a steel shank that is attached to a rounded wooden handle.
Accession No
TM2003.050
Loading...