filters
More Options
Shortlist
  •   Add All to Shortlist
Name/Title
A brass button featuring an embossed anchor and flag design with a raised border round the edge.
Accession No
A97.779

Name/Title
A brass button featuring an embossed anchor and flag design with a raised border round the edge. There is a clip attached to the reverse of the button.
Accession No
A97.780

Name/Title
A 12th Regiment tunic button. The button features " 12 " surrounded by leaf designs and surmounted by a crown. An illegible maker's name is engraved on the reverse of the button.
Accession No
A92.259

Name/Title
A 18th Regiment tunic button. The button features " 18 " surmounted by a harp. " FIRMIN & SONS LONDON " is marked on the reverse of the button.
Accession No
A92.270

Name/Title
A kerosene blow torch with with a tall flat tank and an elongated burner and black plastic adjustment knob fitted to the top. The tank also has an angled pump mechanism and filler cap on top of it and a handle with a wooden grip is attached. A drip tray is fitted below the burner mechanism and there is an outlet for the tank which can be accessed from the underside only. " OTTO BERNZ CO. " is marked in raised letters on the burner. " OTTO BERNZ CO. / INC. / ROCHESTER / N.Y. / BURN CLEAN / STRAIGHT / RUN / FUEL " is marked on the underside of the tank in raised letters.
Accession No
A85.283

Name/Title
A 65th Regiment tunic button. The button features " 65 " at the centre of a raised circle. An illegible maker's name and " LONDON " is engraved on the reverse of the button.
Accession No
A92.269

Name/Title
A 57th Regiment tunic button. The button features " 57 " at the centre surmounted by a crown and surrounded by leaf designs. " ALBUHERA " is embossed above the " 57 ." " SMITH KEMP & WRIGHT BIRMINGHAM " is engraved on the reverse of the button.
Accession No
A92.262

Name/Title
A 43rd Regiment tunic button. The button features " 43 " surrounded by leaf designs. An illegible maker's name is engraved on the reverse of the button.
Accession No
A92.260

Name/Title
A 57th Regiment tunic button. The button features " 57 " at the centre surmounted by a crown and surrounded by leaf designs. " ALBUHERA " is embossed above the " 57 ." " SMITH KEMP & WRIGHT BIRMINGHAM " is engraved on the reverse of the button.
Accession No
A92.261

Name/Title
A 65th Regiment tunic button. The button features " 65 " at the centre of a raised circle. An illegible maker's name and " BIRMINGHAM " is engraved on the reverse of the button.
Accession No
A92.268

Name/Title
A 57th Regiment tunic button. The button features "57" at the centre surmounted by a crown and surrounded by leaf designs. "ALBUHERA" is embossed above the "57." "SMITH KEMP & WRIGHT BIRMINGHAM" is engraved on the reverse of the button.
Accession No
PA2006.295

Name/Title
A navy blue wool cap with a red band of binding around the top. " Kaiapoi " is written on the lining. "FVFB" features in brass lettering on the front. There is a leather sweatband on the inside.
Accession No
A97.476

Name/Title
A dark blue Royal New Zealand Artillery forage cap made of wool with red piping along the edges. There is one small brass button at the front and another is missing.
Accession No
A91.952

Name/Title
A purse with a brass frame and chain. The base is a purple fabric that is covered in purple and clear beadwork.
Accession No
A92.040

Name/Title
A dark blue New Zealand Volunteers forage cap. The outside is trimmed with red ribbon and there is a brass badge of a horn on the side. Two brass buttons fasten at the front and hook and grommets at the sides.
Accession No
A81.880

Name/Title
A New Zealand Volunteers helmet covered in navy blue wool and curved downwards around the front and back of the brim. There is a brass spike at the centre of the crown and a brass badge on the centre front. " New Zealand Volunteers " is written on the badge.
Accession No
A77.326

A large white polyester banner with yellow, purple and black text with a central purple design. " TARANAKI WOMEN / CELEBRATE [yellow]/ N.P.D.C.[black] / WOMEN'S SUFFRAGE / WHAKATU WAHINE / AOTEAROA NEW ZEALAND / 1893 ~ 1993 [purple]". The yellow text is against a purple background. The bottom left corner has a tag, and the top edge is folded over to fit a pole.
Accession No
TM2002.307

Name/Title
A white canvas duffle bag made of fabric that has been folded over and seamed on one side and at the bottom. A half circle brass clasp closes the bag, however, the lock is missing and is currently being held together by a piece of wire.
Accession No
A82.382

Name/Title
A black leather purse with circular brass clasp on the front flap.
Accession No
A69.826

Name/Title
A wheel pricker with a rounded wooden handle attached to a metal shank which is bent near the end. The shank has a circular toothed wheel mounted in a forked carrier which can be adjusted by a wingnut which can allow the wheel to be removed. " J DIXON " is stamped on one side of the shank.
Accession No
TM2003.023

Name/Title
A single crease with a rounded wooden handle attached to a gently curved shank which ends in a shield shaped head with a blunt edge. " 2 " is stamped on the head and some illegible writing is stamped in the shank.
Accession No
TM2003.024

Name/Title
A screw crease with a rounded wooden handle attached to a shank which ends in a shield shaped head which is split in two. A thumbscrew is threaded through the shank. There is a small leather strap at the end of the handle. " J E BUTLER LD. " is stamped into the top of the shank.
Accession No
TM2003.026

Name/Title
A double crease with a rounded wooden handle attached to a slightly curved shank which ends in an axe shaped head with two blunt edges. " 2 " is stamped into the head. " J.E BUTLER Ltd " is stamped into the shank.
Accession No
TM2003.027

Name/Title
A blunt edged knife with an upturned point on the blade and a rounded wooden handle. A brass band is around the handle where the shank meets the handle.
Accession No
TM2003.028

Name/Title
An edge shave with a rounded wooden handle attached to a slender shank which has a groove in the middle of the upper and lower side and a two pronged cutting edge. There is a brass band at the end of the handle where it is attached to the shank. " 1 " is stamped into the shank.
Accession No
TM2003.030
Loading...